10 April, 2014

Calibrating > Bridging @ 30mm/s

To print the 5mm bridge I've set the bridge printing speed to 30mm/s (in Advanced settings of Slic3r). I was very happy with the first result.


50mm bridge @ 30mm/s

Posted by at
Labels: , ,

3 comments:

  1. Florian R.23 April, 2014 19:17

    Hi Kenny,

    I was wondering what vref you got on those stepsticks - I got the same printer and have some issues on the Y axis skipping on "bigger" parts and was wondering if my levels are right.

    Greetings,
    Florian

    ReplyDelete
    Replies
    1. Cagy24 April, 2014 11:17

      Hi Florian,

      Currently I'm having them at 0.5/0.6 Volt. The Z-axis needs a little bit more though.
      Success!

      --Kenny

      Delete
    2. Florian R.24 April, 2014 22:19

      Thanks! My Voltages were way lower - like 0,2 or 0.3.

      Delete

Subscribe to: Post Comments (Atom)