Bridging Gaps - a Bracelet wit loads of gaps.

I still have to do the Bridging calibration step on RepRap.org but decided to check the current bridging capability of my machine.

Bridging = maximize your printers ability to bridge gaps (i.e. print in thin air).

I'm quite happy with the result although some calibration is still needed...

• Object: (todo) from Thingiverse.com 
• 3mm ABS, Brim 15mm, heatbed 110°, hotend 240°C (1st layer 245°C), Layer height 0.2mm, infill 10% 
• No support materials used